Press start once. The rest takes care of itself.
AiroMap brings flying, processing and reporting together in one simple whole. A fully automated process end to end, with no separate software and no manual data handling.
From start to result, with nothing to do in between:
Press start
You select the site and press start. The drone takes off and begins flying on its own.
Automated flight
The drone takes off, flies the calculated route and lands again. Entirely autonomous.
Automatic upload
During and after the flight, the drone uploads its imagery to the cloud over 4G by itself.
Processing in the cloud
The cloud turns that imagery into the data your report is built from, automatically.
Your results are ready in the browser from 20 minutes after the flight. Anyone on your team can do it, with no survey background or drone experience.
One platform, any device, anywhere in the world
AiroMap works exactly the same way on every device you own. The same simple controls everywhere, with nothing to install.
On every screen
Laptop, controller or phone: the same app, the same buttons. No separate versions to learn.
Nothing to install
It all runs in the browser. Log in and you're in. Updates happen on their own.
Reachable from anywhere
Your surveys are stored securely online. View and share them wherever you are, from the site to the other side of the world.
Simple on the surface. Clever underneath.
We have pushed all the complexity into the background so you never run into it. It stays simple for you while clever engineering does the work behind the scenes. Here is what sits under that simplicity.
An interface you understand straight away
We think good software explains itself. AiroMap shows only the buttons you actually need. No menus full of options, no hundred-page manual. Everyone on your team is up and running within half a day.
- Clean, modern interface with nothing in the way
- Only the steps you actually need
- Usable with minimal training
Route planning that does the thinking
Draw the area you want surveyed and the platform works out the optimal flight path itself: the right altitude, overlap and photo coverage for a sharp, complete 3D model. The algorithm accounts for the shape of your site, so every square metre is captured.
- Optimal route and photo coverage, calculated for you
- Full coverage, even on awkward terrain
- Every survey follows exactly the same repeatable process
Our own autonomy software, on board the drone
Our autonomy software runs on the drone itself and controls the entire flight, from take-off through the route to landing. In the air it keeps the drone under continuous control and streams live information to the platform over 4G, so you can follow the flight in real time. The drone runs every survey itself, with no pilot and no manual corrections.
- Our own flight software controls the drone throughout, with no pilot
- Take-off, flight and landing are fully automated
- Follow the flight live over 4G in the platform
One platform, many apps
AiroMap collects the data from every flight and runs different apps on top of it. The 3D app gives you 3D data; the AP04 app generates a sampling grid to BRL 1000, the Dutch standard for batch testing of soil and aggregate. Each app has its own job. The cloud does the computing and you open the result straight in your browser.
- One platform with apps for very different jobs
- New apps extend what your existing drone can do
- Results open in the browser, no powerful computer needed
Apps that grow with you
AiroMap is built from separate apps that all work on the same flight data. That way the platform grows with whatever you need.
3D Model
Our all-in-one measurement tool. Take any measurement you need on the 3D model, build reports and export to your CAD software. The engineering tool for construction, earthworks and more.
AP04
Built for batch inspections. Generates the BRL 1000 sampling grid, the volume calculation and the cross section automatically, to the AP04 protocol.
GCP
Raises 3D accuracy to survey grade. A simple, heavily automated ground control point workflow that is fast, with none of the usual setup work.
Project Tracking
Compare 3D surveys over time and archive them properly. Keep projects clear and see exactly where and when something drifted.
Photo
Produces an accurate, georeferenced aerial image of your site, entirely automatically.
AIWaste Detection
AI-driven detection of waste in aerial imagery. Uses geolocation to generate a heatmap showing where the waste is concentrated.
In developmentRoof Inspection
3D mapping of the exact shape and curvature of complex roofs. For roofing contractors quoting accurately and inspecting roofs for damage.
And more on the way
The platform keeps growing. Got a measurement problem of your own? Tell us and we'll build the app with you.
Monitored automatically, from take-off to landing
Flying fully automatically only works if it is also safe. So AiroMap checks the flight itself, before, during and after the survey. There is nothing for you to verify; the platform handles safety on its own.
Everything checked before start
- Battery, GNSS fix and connection checked
- Weather and wind assessed
- Geofence and flight area confirmed
Monitored live in the air
- Position and altitude tracked continuously
- Stays inside the area you set
- Safe automatic landing on any deviation
Quality checked
- Imagery checked for coverage and sharpness
- Automatic re-flight if anything is missing
- No result until the data is right
And this comes as standard in the platform
Multiple drones
Manage several drones and sites from the same platform. Scaling up is straightforward.
Cloud platform
All your surveys and reports live securely online and can be shared in a couple of clicks.
Everything linked
Reports, models and volumes attach to the flight they came from automatically. Nothing gets lost.
One platform that fits your work
One simple platform across very different jobs.
Stockpile & volume surveys
Measure the exact volume of every stockpile in minutes. No more pacing it out, no more arguments over quantities.
See use case
Civils & infrastructure
An up-to-date 3D model of the whole site for planning and progress. Take levels, work out the cut and fill balance and lay the design over what is actually there.
See use case
AP04 batch inspections
Gridded sampling and a verifiable volume, generated automatically to AP04, the Dutch protocol for testing batches of soil and aggregate. Fully documented and ready to sample against.
See use case
New use cases
Something else you need measured? New apps extend AiroMap into roof inspections, agriculture and logistics. Tell us the problem and we'll build it with you.
See use caseSee the platform working on your own use case
You only really get how simple and how powerful AiroMap is once you see it. Book a free demo: we look at your use case together and walk you through the whole process, from flight to result.
Want to see what AiroMap could do for you?
Leave your email address and we will come back to you as soon as we can. Or book an online intro call straight away.
Book a demo
Pick a slot in our online calendar for a 30-minute intro call. We will look at your situation together and show you what is possible in a demo built around it.
Further reading
See all articles
How a drone gets into a company
Buying a survey system is the easy part. Whether it gets used is the real question. How BK Ingenieurs took it up company-wide instead of as a trial.
Read more
Drone survey or GPS rover: they do not measure the same thing
A GPS rover is accurate about points, a drone about shapes. Why that difference decides which tool fits which survey question, and why you use both.
Read moreWhat do you need in order to fly yourself?
The assumption is usually a pilot licence and a week-long course. In reality you need nothing under 250 grams, and one online theory exam above it.
Read more